Looking for KTM/Excel 18" rear hub or entire wheel assembly

Post here for private sale items

Looking for KTM/Excel 18" rear hub or entire wheel assembly

Postby gman » Tue May 12, 2020 5:31 pm

Do you have a KTM 18" rear wheel assembly where the rim is shot but the hub is still intact circa ~2012-2016-ish? (Ideally 2015)

-Or- Do you have a hub in good shape for an Excel rim circa ~2012-2015?

-Or- Do you have a spare complete 18" wheel assembly (regardless of brand) available for sale in the type/vintage above?

I snapped a tab off the sprocket-side of my rear hub last hear and either looking for a replacement hub or an entire wheel assembly. My rim, spokes, etc are all near perfect. Just need a new hub at minimum.

I'm ultimately looking for any of the above options for my 2015 KTM350-EXCF. If you have/had a 350-EXCF (or a 500) in this vintage, the rear wheel assemblies and/or hub should fit. There is some strangeness with a plastic spacer in some hubs vs others... even within the same series (XCF-W vs EXC-F) but I would be willing to look at/investigate whatever you have.

Figured I'd ping the Forums to see if anyone has one available before I sink a mortgage payment into a new one!

G.
Grant Anderson
Finally joined team Orange. Resistance was futile. KTM 350EXC-F
User avatar
gman
Pro Contributor
 
Posts: 89
Joined: Thu May 01, 2008 1:47 pm
Location: Ottawa (Barrhaven)
enthusiast: Yes
Skill testing question: 2435

Re: Looking for KTM/Excel 18" rear hub or entire wheel assem

Postby oldschoolktm » Mon Jul 13, 2020 8:03 pm

Gord I have a rim!
KTM 525 exc, KTM 300xc w
oldschoolktm
Hardcore Contributor
 
Posts: 142
Joined: Tue Jun 11, 2013 6:33 pm
Location: Stittsville
enthusiast: Yes
Skill testing question: 2435

Re: Looking for KTM/Excel 18" rear hub or entire wheel assem

Postby oldschoolktm » Mon Jul 13, 2020 8:04 pm

sorry G! Thought you were gord! But I do have a rim!
KTM 525 exc, KTM 300xc w
oldschoolktm
Hardcore Contributor
 
Posts: 142
Joined: Tue Jun 11, 2013 6:33 pm
Location: Stittsville
enthusiast: Yes
Skill testing question: 2435

Re: Looking for KTM/Excel 18" rear hub or entire wheel assem

Postby gman » Mon Jul 13, 2020 9:03 pm

I went and bought one dude. Now we just need to lace it up!
Grant Anderson
Finally joined team Orange. Resistance was futile. KTM 350EXC-F
User avatar
gman
Pro Contributor
 
Posts: 89
Joined: Thu May 01, 2008 1:47 pm
Location: Ottawa (Barrhaven)
enthusiast: Yes
Skill testing question: 2435


Return to Private

Who is online

Users browsing this forum: No registered users and 3 guests